Adjusting the speaker volume
ADJUSTING THE DEFAULT INTERNAL SPEAKER VOLUME
Note: The speaker is available only in some printer models.
1. From the control panel, touch SSeettttiinnggss >> DDeevviiccee >> PPrreeffeerreenncceess >> DDeevviiccee SSoouunnddss >> VVoolluummee
2. Adjust the volume.
• If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer performance.
• The volume resets to the default value after the session is logged out or when the printer wakes from Sleep or
Hibernate mode.
CONFIGURING THE FAX SPEAKER SETTINGS
Note: This feature is available only in some printer models.
1. From the control panel, navigate to:
SSeettttiinnggss >> FFaaxx >> FFaaxx SSeettuupp >> SSppeeaakkeerr SSeettttiinnggss
2. Do the following:
• Set the Speaker Mode to AAllwwaayyss OOnn.
• Set the Speaker Volume to HHiigghh.
• Activate the Ringer Volume.
70
Xerox
®
C315 Color Multifunction Printer User Guide
Set up, Install, and Configure
To Next Page
Loading...
