LINKING TRAYS
1. Open a Web browser, then type the printer IP address in the address field.
You can locate the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123
2. Click SSeettttiinnggss >> PPaappeerr >> TTrraayy CCoonnffiigguurraattiioonn.
3. Set the same paper size and paper type for the trays that you are linking.
4. Save the settings.
5. Click SSeettttiinnggss >> DDeevviiccee >> MMaaiinntteennaannccee >> CCoonnffiigguurraattiioonn MMeennuu >> TTrraayy CCoonnffiigguurraattiioonn.
6. Set Tray Linking to AAuuttoommaattiicc.
7. Save the settings.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
WWaarrnniinngg:: The temperature of the fuser varies according to the specified paper type. To avoid printing
issues, match the paper type setting in the printer with the paper loaded in the tray.
Xerox
®
C315 Color Multifunction Printer User Guide 69
Set up, Install, and Configure
To Next Page
Loading...
