Xerox C315

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
• Letter is the U.S. factory default setting. A4 is the
international factory default setting.
• This menu item may vary depending on your
printer model.
SSiiddeess
Off*
Long edge
Short edge
Specify the page orientation of text and graphics when
scanning a two-sided document.
FFiillee NNaammee Specify the file name of the scanned image.
Note: An asterisk (*) next to a value indicates the factory default setting.
AAddvvaanncceedd IImmaaggiinngg
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
CCoolloorr BBaallaannccee Adjust the amount of toner used for each color.
CCoolloorr DDrrooppoouutt
Color Dropout
None*
Red
Green
Blue
Default Red Threshold
0–255 (128*)
Default Green Threshold
0–255 (128*)
Default Blue Threshold
0–255 (128*)
Specify which color to drop during scanning, and adjust
the dropout setting for that color.
AAuuttoo CCoolloorr DDeetteecctt
Color Sensitivity
1–9 (5*)
Area Sensitivity
1–9 (5*)
Set the amount of color that the printer detects from
the original document.
This menu item appears only when Color is set to Auto.
Xerox
®
C315 Color Multifunction Printer User Guide 211
Use the Printer Menus