February 2013
2-36
ColorQube® 9303 Family
01K
Status Indicator RAPs
Quad Wave Amp PWB
• To view the -50V distribution from the IME controller PWB, refer to WD 9.5.
• For -50V faults on quad wave amp PWB, refer to WD 9.13.
• Repair the wiring as necessary, REP 1.1.
• If necessary, install a new quad wave amp PWB, PL 92.10 Item 3.
Figure 1 Component location
Red LED
Power supply unit
To Next Page
Loading...
