February 2013
3-86
ColorQube® 9303 Family
TP 12
Image Quality
TP 12 Chase Page
Chase pages are picked from the selected tray and fed through the media path. No image is
jetted onto the drum.
Chase pages are printed from dC612.
NOTE: All test prints should be printed on A4 or 8.5 x 11 inch plain paper and long edge feed.
Use the best quality media available. Do not use hole punched paper.
Purpose
Chase pages are used to clear the drum of any residual image or possible contamination.
Chase pages are also useful for examining jam conditions and media damage. Use chase
pages to clear the media path, clean light contamination from the registration/preheat assem
-
bly, drum, or transfix roller.