February 2013
vi
ColorQube® 9303 Family
Change History
Introduction
• RAP 71-101-00 to 71-161-00 Tray 1 Mis-Feed Jam
• RAP 72-101-00 to 72-161-00 Tray 2 Mis-Feed Jam
• RAP 73-101-00 to 73-161-00 Tray 3 Mis-Feed Jam
• RAP 74-101-00, 74-160-00 to 74-161-00 Bypass Tray 4 Mis-Feed
• RAP 75-101-00, 75-160-00 to 75-161-00 Tray 5 Mis-Feed
• RAP 82-502-00, 82-503-00 Horizontal Transport Motor M6 Failure
• RAP 88-500-00 to 88-502-00, 88-512-00 Preheat Thermal Error
• RAP 88-508-00 Registration / Preheat Air Pump Incorrect Current
• RAP OF 1:- service bulletin T8009-12-06.
• RAP 89-125-00 to 89-128-00, 89-130-00, 89-131-00 Media Path Sensor 20 Failure
• RAP 99-272-00 to 99-292-00 PEST Error 8
• RAP 99-394-00 to 99-413-00 PEST Error 13
• RAP 99-534-00 to 99-548-00 PEST Error 21
• RAP 94-536-00, 94-538-00, 94-540-00, 94-542-00, 94-544-00, 94-546-00, 94-632-00, 94-
633-00 Drum Heat Error RAP
• RAP 93-545-00 to 93-548-00 Ink Melt Conductivity Error
• RAP IQ 9 Deletions in the Process Direction
• RAP IQ 10 Incorrect Margin, Misregistration or Skew;- service bulletin T8009-12-06
• RAP IQ 11 Smudges, Debris, Smears in the Process Direction, or Paper Stack Marks:-
service bulletin T8009-12-06.
• REP 3.8 Hard Disk Drive
• REP 12.6-171 HVF Ejector Assembly
• REP 89.2 Registration / Preheat Pumps
• PL 1.15
•PL 3.11
• PL 5.15
• PL 5.35
• PL 12.110
• PL 20.10
• PL 31.11
• PL 88.10
• PL 88.11
• PL 91.20
• PL 91.25
• GP 1 Mode Service
• GP 4 Machine Software
• GP 5 Customer Administration Tools
• GP 9 UI Services User Menu Map
• GP 17 Network Clone Procedure
• GP 33 Machine Features
• GP40 Glossary of Terms, Acronyns and Abbreviations
• GP42 How to set the IP Address of the PWS
• GP 44 How to Disable the Firewall of the PWS
• dC103 Billing Plan
• dC131 Table 3
• dC131 Table 4
• dC131 Table 6
• dC131 Table 17
• dC131 Table 20
• dC134 Market Region
• dC301 NVM Initialization
• dC330 Component Control (Table 12)
• dC625 Registration / Preheat Calibration (RaLPH)
•TAG 012
•TAG 014
•TAG 015
•TAG 016
•TAG 018
• PJ Locations (table 8 PJ503 HVF PWB)
• WD 8.6 ( TAG 018 added)
• WD 12.2 (Q12-318 was Q12-135)
• WD 12.13 (PJ 501 deleted, PJ502 extended to replace PJ501)
• WD 12.24 (PJ501 changed to PJ502)
• P of O System Overview; memory options removed.
• P of O Motors (Registration/Preheat Assembly W/TAG 018 added)
• P of O (Compiler Stapler Operation SH1 Home Sensor Q12-318)
• P of O (SH1 Home sensor, Fig 4, Fig 5)
The following procedures are new:
• RAP 16D Wireless Connectivity
• RAP 22-360-00 Service Plan Mismatch
• GP 47 Remote Diagnostics
• GP 48 How to Re-Enter Optional Feature Installation Keys
• GP 49 USB Connection Mode
•
To Next Page
Loading...
Need help?
General
