General Procedures and Information
Phaser 3200MFP / Workcentre PE220 04/07 6-47
GP 6 Engine Test Mode
The Engine Test Mode supplies useful functions to check the condition of the print engine. It tests
the condition of each device and displays the result of the test on the LCD. It is divided into 5 func-
tions (0~4), and these are shown below.
To enter the Engine Test Mode
• Workcentre PE220 - Table 1
• Phaser 3200 - Table 2
Press
in sequence and the LCD briefly displays
‘Engine Test’, the machine has entered Engine Test mode.
Press “0”, “1”, “2”, “3” or “4” to select the Test No.
To Next Page
Loading...
