Xerox Phaser 3200MFP Service Manual

Image Quality
3-8 04/07 Phaser 3200MFP / Workcentre PE220
IQ 6 Dark Image or Black Image
Description
The printed image is dark.
Check and Cause Solution
1. Identify if the problem is caused
by the Scanner or the LSU / Xero-
graphics.
1. Perform pattern test, GP 4. If pat-
tern is good, check the scanner. If
pattern is bad.
Check the LSU:
- PL 1.0
(Workcentre PE220)
- PL 1.1 (Phaser 3200).
2. No charge voltage. 2. Clean the high voltage charge
terminal.
3. Check shading profile. 3. Perform the shading test, GP 4
.
4. Check for CIS problem on the
Main PBA.
4. Check the CIS FFC Cable is
properly connected.
5. Charge voltage is not turned on
due to bad contact between the
power supply in the side of the
Developer and charge terminal of
HVPS.
5. Check the connections between
the main PBA and HVPS.
Check and install new parts as nec-
essary:
• Main PBA
- PL 1.0
(Workcentre PE220)
- PL 1.1
(Phaser 3200)
•HVPS
- PL 1.0
(Workcentre PE220)
- PL 1.1
(Phaser 3200)

Xerox Phaser 3200MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
First Page Out Time	Less than 10 seconds
Copy Resolution	Up to 600 x 600 dpi
Maximum Copy Count	99 copies
Fax Transmission Speed	33.6 kbps
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Operating System Compatibility	Windows, Mac OS
Duplex Printing	Manual
Scan Type	Flatbed
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Media Weight	60 to 163 g/m²
Monthly Duty Cycle	10, 000 pages
Toner Yield	Up to 3, 000 pages