Xerox Phaser 3200MFP - 4 Paper Handling; Selecting Print Materials

Image Quality
Phaser 3200MFP / Workcentre PE220 04/07 3-9
IQ 7 Uneven Density
Description
Print density is uneven.
Check and Cause Solution
1. The pressure force on the left
and right springs of the transfer
roller is not even, the springs are
damaged, the transfer roller is
improperly installed, or the transfer
roller bushing or holder is dam-
aged.
1. Check and install new parts as
necessary:
- PL 6.0
(Workcentre PE220)
- PL 6.1
(Phaser 3200)
2. The toner level is not even on the
developer roller.
2. Gently shake the toner cartridge.
If Image Quality is still poor.
Install a new toner cartridge:
- PL 1.0
(Workcentre PE220)
- PL 1.1
(Phaser 3200)
3. Low toner in toner cartridge. 3. Install a new toner cartridge:
- PL 1.0
(Workcentre PE220)
- PL 1.1
(Phaser 3200)