Image Quality
3-12 04/07 Phaser 3200MFP / Workcentre PE220
IQ 10 Ghost (2)
Description
Ghost occurs at 75.5 mm intervals of the OPC drum on the print.
(When printing on card stock or transparencies using manual feeder)
Check and Cause Solution
When printing on card stock thicker
than normal paper or transparen-
cies such as OHP, higher transfer
voltage is required.
Inform the customer to Select 'Thick
Mode' on paper type menu from the
software application and after using
returning to the original mode is
recommended.
To Next Page
Loading...
