Image Quality
Phaser 3200MFP / Workcentre PE220 04/07 3-15
IQ 13 Contamination on the Face of Page
Description
The background on the face of the printed page is contaminated.
Check and Cause Solution
1. The transfer roller maybe con-
tamInated.
1. Run DRUM Cleaning Mode, GP 3.
Make 2 or 3 prints
2. Toner leakage due to improperly
sealed developer.
2. Install a new toner cartridge:
- PL 1.0
(Workcentre PE220)
- PL 1.1
(Phaser 3200)
3. The fuser roll may be contami-
nated.
3. Check and install a new fuser if
necessary:
- PL 1.0
(Workcentre PE220)
- PL 1.1
(Phaser 3200)