Xerox Phaser 3200MFP - Fax Problems

General Procedures and Information
6-56 04/07 Phaser 3200MFP / Workcentre PE220
In the Paper Exit Area
1. Open and close the front door. The jammed paper automatically exits the machine. If the
paper does not exit, continue to step 2.
2. Gently pull the paper out of the output tray.
Figure 1
3. If there is any resistance and the paper does not move when you pull, or if you cannot see the
paper in the output tray, open the rear door by pulling the tab on it.
Figure 2