Xerox Phaser 3200MFP - Selecting a Location

Status Indicator RAPs
Phaser 3200MFP / Workcentre PE220 04/07 2-17
10B Paper empty with no indication error RAP
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
The paper lamp on the operator panel does not come ON when the paper cassette is empty.
Check and Cause Solution
1. The paper sensor empty actuator, PL 8.0
(Workcentre PE220) / PL 8.1 (Phaser 3200) is
damaged.
1. Check and install a new paper empty sen-
sor actuator:
- PL 8.0 (Workcentre PE220)
- PL 8.1 (Phaser 3200) if necessary.
2. The SMPS or main PBA may be defective. 2. Check and install new parts as necessary:
•SMPS
- PL 1.0 (Workcentre PE220)
- PL 1.1 (Phaser 3200) if necessary.
• Main PBA
- PL 1.0 (Workcentre PE220)
- PL 1.1 (Phaser 3200) if necessary.