124
Customize Menu Settings for Individual Use (Set Mode)
Tables of Set Mode Operations
Set mode no. / item Description
Selectable options
(Options in bold are the default settings)
Page
11 TIMER Switch the timer between ON and
OFF.
ON: 00:00 to 23:59 ☒ /
OFF: 00:00 to 23:59 ☒ /
149
12 PASSWORD Input the password. OFF / [****] 149
13 PTT DELAY Set the PTT delay time. OFF / 20ms / 50ms / 100ms /
200ms
150
14 RPT ARS Turn the ARS function on/off. ON / OFF 150
15 RPT SHIFT Set the repeater shift direction. SIMPLEX / -RPT / +RPT 150
16 RPT SHIFT FREQ Set the repeater shift width. 0.000MHz to 150.000MHz 151
17 SAVE RX Set the receive save time. OFF / 0.2 SEC (1:1) to 60.0 SEC
(1:300)
151
18 STEP Set the channel step. AUTO / 5.0KHz / 62.5KHz /
8.33KHz / 9.0KHz / 10.0KHz /
12.5KHz / 15.0KHz / 20.0KHz /
25.0KHz / 50.0KHz / 100KHz
47
19 DATE & TIME ADJ Set the built-in clock. – 43
20 TOT Set the timeout timer. OFF / 30 SEC to 10 MIN
(European version: 3 MIN)
152
21 VFO MODE Select the frequency selection range
in the VFO mode.
ALL / BAND 152
22 VIBRATOR Select a vibrator mode and set up
the vibrator function.
MODE: OFF / BUSY /
SIGNALING
SELECT: PATTERN1 /
PATTERN2 / PATTERN3
113
23 DIAL KNOB
CHANGE
Swap the DIAL and VOL knob
functions.
– 152
APRS
1 APRS AF DUAL Turn on/off the muting function when
both the APRS function and AF dual
function are active.
ON / OFF –
2 APRS DESTINATION Display the model code. APY02D (Uneditable) –
3 APRS FILTER Select the filter function. Mic-E: ON / OFF
POSITION: ON / OFF
WEATHER: ON / OFF
OBJECT: ON / OFF
ITEM: ON / OFF
STATUS: ON / OFF
OTHER: ON / OFF
ALTNET: ON / OFF
–
4
APRS
MODEM Set the APRS baud rate. OFF / 1200bps / 9600bps –
5 APRS MSG FLASH Set the strobe to flash when there is
an incoming message.
MSG: OFF / 2s to 60s /
CONTINUOUS / EVERY 2s to
EVERY 10s 4sec
GRP: OFF / 2s to 60s /
CONTINUOUS 4sec
BLN: OFF / 2s to 60s /
CONTINUOUS 4sec
–
To Next Page
