129
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: DISPLAY Menu Operations
Changing the Lighting Condition
Change the LCD and key lighting condition.
1 Touch [4 LAMP].
2 Rotate the DIAL to select [KEY], then press the key.
3 Rotate the DIAL to select the lighting condition.
2 SEC (KEY) to
10 SEC (KEY)
When the DIAL is rotated or a key is pressed, the LCD and key
lights remain illuminated for the set time.
CONTINUOUS The LCD and key lights remain illuminated.
OFF The LCD and keys do not light up.
Remark The default setting: 5 SEC (KEY)
4 Press the key.
5 Rotate the DIAL to select [SAVE], then press the key.
6 Rotate the DIAL to select the lighting status after the set illumination time elapses.
OFF After the illumination time selected for [KEY] elapses, the lights
dim to [LEVEL 1] of the LCD dimmer setting.
ON After the illumination time selected for [KEY] elapses, lights turn
off.
Remark The default setting: OFF
Caution
When [KEY] is set to CONTINUOUS, regardless of the [SAVE] setting, the illumination stays lit
according to the LCD dimmer setting level.
Selecting the Display Language
Select the display language from Japanese and English.
1 Touch [5 LANGUAGE].
2 Rotate the DIAL to select the desired language.
JAPANESE Japanese is selected.
ENGLISH English is selected.
Remark The default setting: English
Adjusting the LCD Contrast Level
Adjust the LCD contrast level.
1 Touch [6 LCD CONTRAST].
2 Rotate the DIAL to select the desired contrast level.
Select from LEVEL 1 to LEVEL 15.
Remark The default setting: LEVEL 7
To Next Page
Loading...
