Yaesu FT2DR - Assigning a Name to a Memory Channel

60
Using the Memory
A Wide Variety of Memory Functions
Assigning a Name to a Memory Channel
1 Press the key to enter Memory mode.
2 Recall the memory channel to assign the name.
Tip
To assign a name to a home channel, recall the desired home channel.
3 Press and hold for over one second.
The transceiver enters Set mode.
4 Touch [MEMORY].
5 Touch [3 MEMORY NAME].
6 See “Entering Letters” on page 19 to input a memory
tag.
7 Press .
The memory tag is saved to the memory channel, and the transceiver exits from Set
mode.