141
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: SIGNALING Menu Operations
Setting the Type of Squelch
Select [11 SQL TYPE] to open the squelch only when a signal containing the specified
tone or code is received.
For details, see “Using the Tone Squelch Function” on page 109.
Selecting a CTCSS Tone Frequency
Select [12 TONE SQL FREQ] to select the tone frequency from 50 types between 67.0
MHz and 254.1 MHz.
For details, see “Setting the Tone Frequency” on page 110.
Setting the Sound and Speed During Tone Search
Tone Search Function
The audio may be muted during tone search. The operation speed of the tone search can
also be changed.
1 Rotate the DIAL, then touch [13 TONE-SRCH].
2 Rotate the DIAL to select [MUTE], then press the key.
3 Rotate the DIAL to select the desired setting.
ON Mutes the audio during the tone search operation.
OFF Does not mute the audio during the tone search operation.
Remark The default setting: ON
4 Rotate the DIAL to select [SPEED], then press the key.
5 Rotate the DIAL to select the desired setting.
FAST Speed up the tone search operation.
SLOW Slow down the tone search operation.
Remark The default setting: FAST
ON/OFF for the Weather Alert Feature
Setting the weather Alert Feature, used for notifying storms and hurricanes, ON or OFF.
1 Rotate the DIAL, then touch [14 WX ALERT].
2 Rotate the DIAL to select the desired setting.
ON Enables the Weather Alert Feature.
OFF Disables the Weather Alert Feature.
Remark The default setting: OFF
To Next Page
Loading...
