Yaesu FT2DR - VFO Dual Receive; VFO Mode → Priority Memory Channel

97
Convenient Functions
Dual Receive (DW) Function
VFO Dual Receive
VFO mode → Priority memory channel
1 Press the key to enter Memory mode.
2 Touch [F MW] for over one second.
The memory registration mode is enabled, and the channel number blinks.
3 Rotate the DIAL to select the desired memory channel.
4 Touch [PRI.CH].
The memory channel to preferentially receive
(Priority Memory Channel) is selected. The “P”
appears on the LCD.
5 Press the key to enter VFO mode.
6 Select the frequency you want to constantly monitor.
7 Touch [F MW].
8 Touch [DW].
The Dual Reception starts and “VDW” appears on
the LCD.
9 Touch [STOP].
The Dual Reception is canceled.