EasyManua.ls Logo

Yaesu FT2DR - Recalling Preset Receiver Memory Channels to Listen to World Wide Broadcasts

Yaesu FT2DR
173 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
Using the Memory
Convenient Preset Receiver Memory Channels
Memory channel No. Frequency (MHz) Memory channel No. Frequency (MHz)
13 156.650 72 156.625
14 156.700 73 156.675
15 156.750 74 156.725
16 156.800 75 156.775
17 156.850 76 156.825
18 156.900 161.500* 77 156.875
19 156.950 161.550* 78 156.955 161.550*
20 157.000 161.600* 79 156.975 161.575*
21 157.050 161.650* 80 157.025 161.625*
22 157.100 161.700* 81 157.075 161.675*
23 157.150 161.750* 82 157.125 161.725*
24 157.200 161.800* 83 157.175 161.775*
25 157.250 161.850* 84 157.225 161.825*
26 157.300 161.900* 85 157.275 161.875*
27 157.350 161.950* 86 157.325 161.925*
28 157.400 162.000* 87 157.375 161.975*
88 157.425 162.025*
Remark
* indicates the frequency of the VHF marine base station. For example: if the preset receiver memory
channel 1 is selected, the base station frequency 160.650 MHz appears and @ lights up. Touching
[F MW] followed by [REV] displays the Ship Station frequency 160.650 MHz and @ lights up. The
frequency lower than the base station frequency by 4.6 MHz is the Ship Station frequency and duplex
operation may commence. To return to the base station frequency, press [F MW] followed by [REV].
Recalling Preset Receiver Memory Channels to Listen to World
Wide Broadcasts
The frequencies (89 channels) used for international worldwide broadcasting are
registered to the dedicated preset receiver memory channels.
1 Press the key to set the A-band as the operating band.
2 Touch [F MW].
3 Touch [P.RCVR].
Preset Receiver mode is activated.
4 Press the key to select [SW].
5 Rotate the DIAL to select the desired channel.
Remarks For the available world broadcast station frequencies, see the following table.
To stop reception of the world broadcast, touch [F MW] followed by [P.RCVR].
y Depending on time zone or signal strength, broadcasts may not be received.
y There are broadcast stations other than those listed below that can also be received. In addition,
the broadcast station frequency may be changed, it may be off-air or have become abolished. For
current details, please refer to a commercially available frequency list.

Table of Contents

Other manuals for Yaesu FT2DR

Related product manuals