62Y3A11
6-76
1
2
3
4
5
6
7
8
I
Example:
If “M” is “24.00 mm” and “F” is “+5”, then
T1 = 24.50 + (+5)/100 – 24.00 mm
= 0.50 + 0.05 mm = 0.55 mm
If “M” is “24.00 mm” and “F” is “–5”, then
T1 = 24.50 + (–5)/100 – 24.00 mm
= 0.50 – 0.05 mm = 0.45 mm
3. Select the forward gear shim(s) (T1) as
follows.
Example:
If “T1” is “0.45 mm”, then the forward gear
shim is 0.42 mm.
If “T1” is “0.50 mm”, then the forward gear
shim is 0.48 mm.
Calculated numeral
at 1/100 place
Rounded numeral
1, 2 0
3, 4, 5 2
6, 7, 8 5
9, 10 8
Available shim thicknesses:
0.10, 0.12, 0.15, 0.18, 0.30, 0.40, and
0.50 mm
Shimming (FT50B, FT50C) (for worldwide)
To Next Page
