Yamaha F50A - Assembling the Forward Gear

LOWR
Lower unit
6-65
62Y3A11
3. Install the original shim(s) and taper roller
bearing outer race.
È
For USA and Canada
É
For worldwide
CAUTION:
Add or remove shims, if necessary, when
replacing the forward gear or lower case.
Assembling the forward gear
1. Install the new taper roller bearing into
the forward gear using a press.
È
For USA and Canada
É
For worldwide
2. Install the new needle bearing into the
forward gear to the specified depth.
Forward gear bearing cup installer
9
:
YB-06276-B
Driver handle
0
: YB-06071
Bearing outer race attachment
A
:
90890-06621
Driver rod LL
B
: 90890-06605
Forward gear needle bearing and tapered
roller bearing installer
1
: YB-06200
Bearing inner race attachment
2
:
90890-06662
Bearing housing needle bearing remover
3
:
YB-06112
Needle bearing attachment
3
:
90890-06614
Driver handle
4
: YB-06071
Driver rod L3
4
: 90890-06652
Depth
a
: 1.1 mm (0.04 in)