Yamaha F50A - Predelivery Checks; Checking the Fuel System; Checking the Gear Oil; Checking the Engine Oil

GEN
INFO
General information
1-33
62Y3A11
Predelivery checks
1
To make the delivery process smooth and
efficient, the predelivery checks should be
completed as explained below.
Checking the fuel system
1. Check that the fuel hoses are securely
connected and that the fuel tank is full
with fuel.
CAUTION:
This is a 4-stroke engine. Never use pre-
mixed fuel.
Checking the gear oil
1. Check the gear oil level.
Checking the engine oil
1. Check the oil level.
NOTE:
• If the engine oil is above the maximum level
mark
a
, drain sufficient oil until the level is
between
a
and
b
.
• If the engine oil is below the minimum level
mark
b
, add sufficient oil until the level is
between
a
and
b
.
Checking the battery
1. Check the capacity, electrolyte level, and
specified gravity of the battery.
2. Check that the positive and negative bat-
tery leads are securely connected.
S62Y1470
Recommended engine oil:
API: SE, SF, SG, SH
SAE: 10W-30, 10W-40, or 20W-40
Oil capacity:
Without oil filter replacement:
2.0 L (2.1 US qt, 1.8 Imp qt)
Battery capacity: 70–100 Ah (252–360 kC)
Minimum cold cranking performance:
380 A
Electrolyte specific gravity:
1.28 at 20 °C (68 °F)