Yamaha F50A - Disassembling the Oil Pan; Checking the Oil Strainer and the Relief Valve; Assembling the Oil Pan

BRKT
Bracket unit
7-39
62Y3A11
Disassembling the oil pan
1. Remove the muffler
1
from the oil pan
2
.
2. Remove the exhaust manifold
3
from
the oil pan
2
.
3. Remove the oil pan
2
from the exhaust
guide
4
.
4. Remove the oil strainer
5
and the relief
valve housing
6
.
È
FT50C
Checking the oil strainer and the
relief valve
1. Check the oil strainer and relief valve for
dirt and residue. Clean if necessary.
Assembling the oil pan
1. Install the gaskets onto the exhaust
guide
1
.
2. Install the relief valve assembly
2
by
installing the bolts, then tightening them
finger tight.
3. Install the oil strainer
3
by installing the
bolts.