BRKT
Bracket unit
7-1
62Y3A11
Troubleshooting
7
Before troubleshooting the power trim and tilt unit, check that all electrical connections are tight and
free from corrosion, and that the battery is fully charged to 12 V.
Symptom: Power trim and tilt unit does not operate.
Listen for the operation sound
of the power trim and tilt relay.
Listen for the operation sound
of the power trim and tilt motor.
Check that the manual release
plug is closed.
Check the power trim and tilt
fluid level.
Disassemble the power trim and
tilt unit, and then check it.
Check the power trim and tilt
motor.
Replace the power trim and tilt
relay.
Close the plug.
Add fluid to the correct level.
At specified
level?
Can 12 V be
obtained?
Can 12 V be
obtained?
Can the oper-
ation sound
be heard?
Can the oper-
ation sound
be heard?
Replace the power
trim and tilt relay.
Check for continuity
between the battery,
relay, and switch.
Check the voltage between the
sky blue (Sb) lead and black (B)
lead.
Check the voltage between each terminal.
• Between the sky blue (Sb) lead and black (B) lead.
• Between the light green (Lg) lead and black (B) lead.
Is it closed?
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
To Next Page
Loading...
