Yamaha F50A - Checking the Pinion and Forward Gear; Checking the Bearings; Checking the Drive Shaft; Checking the Shift Rod and Shift Cam

LOWR
Lower unit
6-25
62Y3A11
Checking the pinion and forward
gear
1. Check the teeth of the pinion, and the
teeth and dogs of the forward gear for
cracks or wear. Replace the pinion or
gear if necessary.
Checking the bearings
1. Check the bearings for pitting or rum-
bling. Replace if necessary.
Checking the drive shaft
1. Check the drive shaft for bends or wear.
Replace if necessary.
Checking the shift rod and shift cam
1. Check the shift rod and shift cam for
cracks or wear. Replace if necessary.
Checking the lower case
1. Check the skeg and torpedo for cracks or
damage. Replace if necessary.
Assembling the lower case
1. Install the shift rod assembly
1
and shift
cam
2
as shown.
NOTE:
Install the shift cam with the “UP” mark
a
facing upward.
S62Y6260
S62Y6265