POWR
Power unit
5-1
62Y3A11
Troubleshooting
5
Before troubleshooting the power unit, check that all electrical connections are tight and free from
corrosion, and that the battery is fully charged to 12 V.
Symptom: Engine does not crank.
• Check the starting system.
• Check the power unit.
Check that the gearshift is in the
neutral position.
Check the neutral switch for
continuity.
Check the engine start switch
for continuity.
Check the engine shut-off
switch for continuity.
Replace the engine shut-off
switch.
Is the gearshift
in neutral?
Is there conti-
nuity?
Is there conti-
nuity?
Is there conti-
nuity?
Is there conti-
nuity?
Set it to the neutral position.
Replace the neutral switch.
Replace the engine start switch.
Replace the fuse.
Yes
Yes
Yes
No
Yes
No
No
No
Yes
No
Continued on next page.
Check the fuse for continuity.
To Next Page
Loading...
