8.3 Alarm Message List
8-15
1031
MEMORY
ERROR
(MOTION1)
The file data used by MOTION are damaged.
Initialize the damaged file in the maintenance
mode.
33 • The name position file is dam-
aged.
34 • The conveyor condition file is
damaged.
35 • The Press characteristics file is
damaged.
36 • The servo float condition file is
damaged.
37 • The spot welding Power Source
condition data file is damaged.
38 • The air-gun condition file is dam-
aged.
39 • The motor-gun condition file is
damaged.
40 • The gun pressure file is damaged.
41 • The dry-spotting gun pressure file
is damaged.
42 • The anticipation OT# output file is
damaged.
43 • The anticipation OG# output file is
damaged.
44 • The handling condition file is dam-
aged.
45 • The form cut file is damaged.
46 • The spot (user) I/O allocation file
is damaged.
47 • The linear servo float condition file
is damaged.
48 • The macro definition file is dam-
aged.
49 • The seal amount correction condi-
tion file (spray) is damaged.
50 • The seal amount correction condi-
tion file (undercoating) is dam-
aged.
51 • The arc monitor file is damaged.
52 • The motor-gun condition auxiliary
file is damaged.
53 • The job registration table is dam-
aged.
54 • The painting device condition file
is damaged.
55 • The painting system file is dam-
aged.
56 • The painting condition file is dam-
aged.
57 • The paint characteristics file is
damaged.
58 • The EVB gun file is damaged.
59 • The paint filling file is damaged.
60 • The welding pulse condition file is
damaged.
61 • The clearance file is damaged.
Alarm Message List
Alarm
Number
Message
Sub
Code
Cause Remedy
To Next Page
Loading...
