EasyManuals Logo

Zultys ZIP2x2 User Manual

Zultys ZIP2x2
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
106
ZIP2x2 User’s Manual
address of the NTP server (you can specify this as an IP address or an FQDN)
address of the TFTP server (you can specify this as an IP address or an FQDN)
If you enable DHCP you should not ordinarily modify these parameters on the phone. If the
server does not provide all of these parameters, or if you want to make a change to one of the
parameters, you can set it from the appropriate menu.
1
When you disable DHCP, you must enter these parameters manually.
2
8.5.2.2 Phone Address
This panel displays the IP address of the phone. The address was either obtained dynamically
through DHCP or is a static address that you manually configure. The padlock icon indicates that
the IP address was assigned by the DHCP server and cannot be modified through the menu.
To access this panel, select Menu | Pswd Settings | IP Settings | Phone Address.
8.5.2.3 Subnet Mask
This panel displays the subnet mask of the phone. This mask address was either obtained
dynamically through DHCP or is an address that you manually configure.
To access this panel, select Menu | Pswd Settings | IP Settings | Subnet Mask.
8.5.2.4 Default Gateway
This panel displays the IP address for the gateway that resides on the same subnet as the phone.
The address was either obtained dynamically through DHCP or is a static address that you
manually configure.
To access this panel, select Menu | Pswd Settings | IP Settings | Default Gateway.
1. You need to reboot the phone for any changes to the IP parameters to take effect. If the phone reads data from the DHCP
server during the boot up process, it will overwrite parameter that you have modified if the server provides those pa-
rameters. The phone will not overwrite parameters that not received from the DHCP server.
2. For each of the parameters that you enter from the keypad, you can enter only an IP address and cannot enter an FQDN.
PSettings | IP
Address of phone
¢192.168.0.6
PSettings | IP
Subnet mask
}255.255.254.0
PSettings | IP
Default gateway
}10.1.30.1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zultys ZIP2x2 and is the answer not in the manual?

Zultys ZIP2x2 Specifications

General IconGeneral
BrandZultys
ModelZIP2x2
CategoryIP Phone
LanguageEnglish

Related product manuals