Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 120
Note
· You can select the following triggers:
o Wind speed sensor (Wind) of weather station
o Rain sensor (Rain) of weather station
o Input contact configured for wind, rain, ice or as a general alarm (Input contact).
· In the case of a wind speed sensor of the weather station, configure the wind speed at which the
protective function becomes active.
· In the case of an input contact, select whether the protective function is triggered when the
contact is open or closed.
· Step 4: Select the effective range (one or more rooms and groups).
Path: App overview > Protective functions > Configure> Effective range
· Step 5: Configure the protective function.
Path: App overview > Protective functions > Configure
For more information see Section Configuration options
123
To Next Page
Loading...