Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 88
10.3.5 Configuration options: DALI-2 devices
The following table provides a description of the parameters:
The name of the instance, entered by the user.
The effective range to which the instance has been assigned.
· Switch/remote control: if a new effective range is selected for switches or
remote controls, the corresponding switch/remote control is also
displayed in the new area (room, group or zone) in the system image.
· Light sensor:
o Shows the effective range assigned to the sensor in the Daylight
linking app.
o If the sensor is used for the conditional scene recall with the twilight
condition, the effective range in which the condition is active is also
displayed.
· Presence detector: shows the effective range assigned to the sensor in
the Presence linking app.
Table 44: Configuration options – DALI-2 devices
Note
The individual configuration options for the instances can be found in the relevant sections covering
configuration options for input devices.
For more information see Section Configuration options: input devices
75
To Next Page
Loading...