Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 87
10.3.4 Configuration options: signalling contacts
A signalling contact is a contact that is used to forward status information. The signalling contact is opened or
closed if the status changes.
Path: App overview > System image
The following signalling contacts can be installed in your LITECOM system:
· Signalling contacts: e.g. LM-4RUKS
Note
The default configuration of these devices can only be changed using the Mobile Maintenance Tool
commissioning software from Zumtobel.
· Remote display: ONLITE BRI
The following table provides a description of the individual configuration options:
Information entered by the user for ONLITE BRI (e.g. installation location,
article number).
Table 43: Configuration options – ONLITE BRI
To Next Page
Loading...