Zumtobel LITECOM - Conditional Scene Recall

Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 105
10.6 Conditional scene recall
A conditional scene recall is a way of controlling luminaires, blinds, windows and screens, in which certain
conditions must be met in order for a scene to be recalled.
Path: App overview > Conditional scene recall
There are different types of conditional scene recall.
Type
Description
Condition: time
A scene is recalled in an effective range at a specific time. The scene can be recalled on
an individual weekday or all weekdays. Date groups can also be added as exceptions.
The scene recall can also be made to depend on the scene in a specific room or zone if
desired.
i
Note
For more information and an application example see Section Condition:
time
Condition: scene
A certain scene is recalled in an effective range, but only if a specific scene is active in a
specific room or zone. The scene can be recalled on an individual weekday or all
weekdays. Date groups can also be added as exceptions. You can also set a specific
action timeframe in which the scene recall takes place.
i
Note
For more information and an application example see Section Condition:
scene
Condition: twilight
A certain scene is recalled in an effective range but only if the illuminance measured by
a specific light sensor exceeds or falls below a defined threshold for a certain amount of
time. The scene can be recalled on an individual weekday or all weekdays. Date groups
can also be added as exceptions. You can also set a specific action timeframe in which
the scene recall takes place.
i
Note
For more information and an application example see Section Condition:
twilight
Condition: sunrise/sunset
A scene is recalled in an effective range depending on the sunrise or sunset. The scene
can be recalled on an individual weekday or all weekdays. Date groups can also be
added as exceptions.You can also set a specific action timeframe in which the scene
recall takes place.
i
Note
For more information and an application example see: Section Condition:
sunrise/sunset
Function: all off
The absence scene is recalled in all rooms at a specific time. The scene can be recalled
on an individual weekday or all weekdays. Date groups can also be added as
exceptions.
i
Note
For more information and an application example see Section Function: all
off
108
110
111
112
114