Commissioning
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 39
9.3 Addressing wizard
Devices can be controlled individually, by group or by room with your LITECOM system.
To do this, a system image must be created and the devices must be addressed. The system image is a list-like
representation of the LITECOM system in the web application. It contains rooms, groups and the devices installed
in the system. In addition – if available – zones and the addressed control equipment therein are also displayed.
The device is identified using its production number during addressing. The device is then assigned to a room and
a group.
The addressing wizard guides the user through the individual steps of addressing and provides related assistance.
Path: App overview > Addressing wizard
Note
You can also use the addressing wizard for system extensions. During a system extension, devices
which are new in an existing, addressed system are addressed. Addressing for previously
addressed devices will remain unchanged.
Running the addressing wizard
Requirement:
— The Addressing wizard app is activated.
Path: App overview > LITECOM Store > Addressing wizard
Path: App overview > Addressing wizard
1. Navigate to the path.
ÜThe addressing wizard starts.
2. Follow the addressing wizard instructions.
To Next Page
Loading...