Zumtobel LITECOM - Your LITECOM System

Your LITECOM system
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 11
4 Your LITECOM system
Application area
The LITECOM CCD control device is designed to control a maximum of 250 luminaires and motors. It has three
DALI-compliant outputs and an LM-Bus interface.
i
Note
The LM-Bus is not supplied with power via the LITECOM CCD control device. It requires an external
bus supply: LM-BV (art. no. 20 975 247) or LM-BVS35 (art. no. 22 115 026).
i
Note
In these instructions, LITECOM CCD refers to any LITECOM control device, regardless of whether it
supports DALI-2 or has just one DALI channel.
System limits – hardware
· per LITECOM CCD control device, max. 250 luminaires and motors
· The following emergency luminaires are supported:
Device
Type
Lamp
Available
backup
durations
Explanation
EMpowerX LED ExD
Maintained light that
can be switched/
dimmed/brightened
LED
· 1 h
· 3 h
Standard LED emergency
lighting control gear
EMpower PROset ExD
Maintained light that
can be switched/
dimmed/brightened
LED
· 1 h
· 3 h
Standard LED emergency
lighting control gear
EMpower1 CT LED NTx
Maintained light that
can be switched/
dimmed/brightened
LED
· 1 h
· 3 h
Standard LED emergency
lighting control gear
EMpower2 CT LED NTx
Maintained light that
can be switched/
dimmed/brightened
LED
· 1 h
· 3 h
Standard LED emergency
lighting control gear
EMpower1 LED NTx
Maintained light that
can be switched/
dimmed/brightened
LED
· 1 h
· 3 h
Standard LED emergency
lighting control gear
EMpower2 LED NTx
Maintained light that
can be switched/
dimmed/brightened
LED
· 1 h
· 3 h
Standard LED emergency
lighting control gear
EM PRO EZ-3
Non-maintained light
Fluorescent lamp
· 1 h
· 3 h
EM converter for fluorescent
luminaires
EM PRO G2
Non-maintained light
Fluorescent lamp
· 1 h
· 3 h
EM converter for fluorescent
luminaires, follow-on product
for EM PRO EZ-3
EM converterLED PRO 50V
EM converterLED PRO 90V
EM converterLED PRO 250V
Non-maintained light
LED
· 1 h
· 2 h
· 3 h
EM converter for LED
luminaires
EM powerLED PRO EZ-3, 1 –
2 W
Maintained light that
can be switched/
LED
· 1 h
EM converter for LEDs,
converters from 2015 or later