Maintenance
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 164
3. Select the LFF file and open it.
ÜA pop-up window with a progress bar appears.
ÜThe files for the software update are uploaded.
ÜThe software is updated.
ÜThe LITECOM CCD control device is restarted.
Note
This process may take several minutes.
ÜAs soon as the software is updated, a corresponding message appears.
4. Tap the Reload button.
ÜThe start page appears.
Note
Once the software has been successfully updated and you have connected to the web application
with another display device, a message appears, indicating that the web application interface must
be reloaded due to a software update.
wConfirm the message.
ÜThe web application interface is reloaded.
ÜThe start page appears.
Note
· After updating from software version 3.3.x to version 3.5.0 or higher, the administrator and control
device have to undergo initial configuration again.
For more information see Section Connecting to the LITECOM CCD for the first time
· All profiles and room/group/zone assignments are lost in the user management after updating to
software version 3.5.0 or higher. The passwords of all users are lost. All users with user names
that do not meet the requirements are also deleted. A message is displayed in the log.
For more information see Section Managing users or Section Log
30
131 167
To Next Page
Loading...