Maintenance
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 166
Updating new TFF files on the LITECOM-Touchpanel TCI
Requirements:
— A new version of the LITECOM touch panel (TFF file) has already been loaded via the LITECOM web
application onto the LITECOM CCD.
Path: App overview > Basic settings > Software versions
— On the LITECOM-Touchpanel TCI, the start page of the LITECOM touch panel app is displayed.
1. Select Update app button.
ÜThe Update app view is displayed. Which version is currently on the LITECOM-
Touchpanel TCI and whether an updated version is available, is shown.
2. If a more recent version is available, select Load from LITECOM CCD button.
ÜThe current version is downloaded from the LITECOM CCD; then the app is
updated automatically. This procedure may take several minutes.
3. Confirm that the application to be installed is replacing another application.
4. Confirm access rights to the app.
5. Tap Install button.
ÜThe app is installed and restarted automatically after the installation.
To Next Page
Loading...