Interface description
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 22
Temporarily change a scene via control element
As soon as a button is tapped (e.g. intensity at device level), a control
element (such as a slider) appears below. For certain devices (such
as special luminaires) multiple control elements appear. These
control elements can be used to temporarily change the scene. The
changes applied remain in place until the next scene is recalled.
Tap the cross (X symbol) to exit detail control and go to the start
page. The changes applied remain in place until the next scene is
recalled.
Table 11: Detail control functions
To Next Page
Loading...