Interface description
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 24
Tap the Start page button to access the start page.
Note
Password protection is not enabled. Use this function to
switch to the start page to test functions when
commissioning, configuring or servicing the LITECOM
system.
Tap the Pix button to access the alternative start page.
Note
Pix cannot be used with LITECOM infinity.
Commission, configure and maintain the
LITECOM system
There are a variety of apps that can be used to commission,
configure and maintain the LITECOM system.
Note
A licence must be requested and then activated via the
LITECOM Store for certain apps.
For more information see Section Licensing LITECOM
Store
Switch between individual pages of the app
overview
The number of points corresponds to the number of the pages in the
app overview. The point filled in with colour indicates the page
currently being displayed. Tap an empty point to go to the
corresponding page.
Table 12: Functions in the app overview
27
To Next Page
Loading...