Chapter 58 Configure Clone
GS3700/XGS3700 Series User’s Guide
507
Advanced
Application
Select which port settings (configured in the Advanced Application menus) should be
copied to the destination ports.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 255 Management > Configure Clone (continued)
LABEL DESCRIPTION
To Next Page
Loading...
