Chapter 59 Access Control
XGS4600 Series User’s Guide
550
autonegotiatio
n
zyPortAutonegotiationFailed 1.3.6.1.4.1.890.1.15.
3.61.3.1
This trap is sent when an Ethernet interface
fails to auto-negotiate with the peer
Ethernet interface.
lldp lldpRemTablesChange 1.0.8802.1.1.2.0.0.1 The trap is sent when entries in the remote
database have any updates.
Link Layer Discovery Protocol (LLDP), defined
as IEEE 802.1ab, enables LAN devices that
support LLDP to exchange their configured
settings. This helps eliminate configuration
mismatch issues.
transceiver-
ddm
zyTransceiverDdmiTemperatur
eOutOfRange
1.3.6.1.4.1.890.1.15.
3.84.3.1
This trap is sent when the transceiver
temperature is above or below the normal
operating range.
zyTransceiverDdmiTxPowerOut
OfRange
1.3.6.1.4.1.890.1.15.
3.84.3.2
This trap is sent when the transmitted optical
power is above or below the normal
operating range.
zyTransceiverDdmiRxPowerOut
OfRange
1.3.6.1.4.1.890.1.15.
3.84.3.3
This trap is sent when the received optical
power is above or below the normal
operating range.
zyTransceiverDdmiVoltageOut
OfRange
1.3.6.1.4.1.890.1.15.
3.84.3.4
This trap is sent when the transceiver supply
voltage is above or below the normal
operating range.
zyTransceiverDdmiTxBiasOutOf
Range
1.3.6.1.4.1.890.1.15.
3.84.3.5
This trap is sent when the transmitter laser
bias current is above or below the normal
operating range.
zyTransceiverDdmiTemperatur
eOutOfRangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.6
This trap is sent when the transceiver
temperature is recovered from the out of
normal operating range.
zyTransceiverDdmiTxPowerOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.7
This trap is sent when the transmitted optical
power is recovered from the out of normal
operating range.
zyTransceiverDdmiRxPowerOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.8
This trap is sent when the received optical
power is recovered from the out of normal
operating range.
zyTransceiverDdmiVoltageOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.9
This trap is sent when the transceiver supply
voltage is recovered from the out of normal
operating range.
zyTransceiverDdmiTxBiasOutOf
RangeRecovered
1.3.6.1.4.1.890.1.15.
3.84.3.10
This trap is sent when the transmitter laser
bias current is recovered from the out of
normal operating range.
Storm-control zyPortStormControlTrap 1.3.6.1.4.1.890.1.15.
3.78.2.1
This trap is sent when storm control is
detected on a specific port. A packet filter
action has been applied on the interface.
Table 267 SNMP Interface Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
To Next Page
Loading...
