ZyXEL Communications XGS4600 Series - Page 549

Chapter 59 Access Control
XGS4600 Series User’s Guide
549
loginrecord zyAccessControlLoginRecord 1.3.6.1.4.1.890.1.15
.3.9.4.1
This trap is sent when users log in.
zyAccessControlLogoutRecord 1.3.6.1.4.1.890.1.15
.3.9.4.2
This trap is sent when users log out.
zyAccessControlLoginFail 1.3.6.1.4.1.890.1.15
.3.9.4.3
This trap is sent when users fail in login.
stacking zyStackingChannelUp 1.3.6.1.4.1.890.1.15
.3.97.4.1
This trap is sent when stacking channel
changes from down to up.
zyStackingChannelDown 1.3.6.1.4.1.890.1.15
.3.97.4.2
This trap is sent when stacking channel
changes from up to down.
zyStackingSlotAttach 1.3.6.1.4.1.890.1.15
.3.97.4.3
This trap is sent when a Switch is attached
successfully into the stacking system.
zyStackingSlotDetach 1.3.6.1.4.1.890.1.15
.3.97.4.4
This trap is sent when a Switch is detached
from a stacking system.
zyStackingNewMaster 1.3.6.1.4.1.890.1.15
.3.97.4.5
This trap is sent when a Switch is selected as
the new master in stacking system.
zyStackingUpgradeFirmwareF
ail
1.3.6.1.4.1.890.1.15
.3.97.4.6
This trap is sent when upgrade firmware fails
on a stacked Switch.
zyStackingNewBackup 1.3.6.1.4.1.890.1.15
.3.97.4.7
This trap is sent when a Switch is selected as
the new backup in stacking system.
zyStackingBackupTakeover 1.3.6.1.4.1.890.1.15
.3.97.4.8
This trap is sent when a master Switch is loss
and replaced by a backup to become the
new master.
zyStackingNewMasterFromTak
eover
1.3.6.1.4.1.890.1.15
.3.97.4.9
This trap is sent when a new master Switch
takes over from a former master.
zyStackingSyncConfFail 1.3.6.1.4.1.890.1.15
.3.97.4.10
This trap is sent when a configuration sync
fails.
zyStackingSysRestoreConfFail 1.3.6.1.4.1.890.1.15
.3.97.4.11
This trap is sent when a backup Switch
becomes the master and configuration
restore fails.
zyStackingSlotInitFail 1.3.6.1.4.1.890.1.15
.3.97.4.12
This trap is sent when a newly attached
Switch initialization fails.
zyStackingSlotChangeIndex 1.3.6.1.4.1.890.1.15
.3.97.4.13
This trap is sent when a stacking slot index
changes.
zyStackingPriorityChange 1.3.6.1.4.1.890.1.15
.3.97.4.14
This trap is sent when the stacking priority
changes. Stacking priority determines which
is master.
zyStackingTopologyChange 1.3.6.1.4.1.890.1.15
.3.97.4.15
This trap is sent when a stacking topology
(ring or chain) changes.
Table 267 SNMP Interface Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
linkup linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
linkdown linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is
down.
Table 266 SNMP System Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION