3Com Switch 4500 Family - Display Link-Delay; Display Loopback-Detection

1-10
Field Description
collisions
The number of detected collisions
(Transmission of a frame will be aborted upon
detection of a collision.)
late collisions
The number of detected late collisions
(A late collision occurs if the transmission of a frame
defers due to detection of collision after its first 512 bits
have been transmitted.)
lost carrier
The lost carrier counter applicable to serial WAN
interfaces
The counter increases by 1 upon each carrier loss
detected during frame transmission.
- no carrier
The no carrier counter applicable to serial WAN
interfaces
The counter increases by 1 upon each carrier detection
failure for frame transmission.
display link-delay
Syntax
display link-delay
View
Any view
Parameters
None
Description
Use the display link-delay command to display the information about the ports with the link-delay
command configured, including the port name and the configured delay.
Related commands: link-delay.
Examples
# Display the information about the ports with the link-delay command configured.
<Sysname> display link-delay
Interface Time Delay
===================== ==============
Ethernet1/0/5 8
display loopback-detection
Syntax
display loopback-detection