1-3
Field Description
Storage-type
Storage type, which can be:
z volatile: Information will be lost if the system
is rebooted
z nonVolatile: Information will not be lost if the
system is rebooted
z permanent: Modification is permitted, but
deletion is forbidden
z readOnly: Read only, that is, no modification,
no deletion
z other: Other storage types
display snmp-agent group
Syntax
display snmp-agent group [ group-name ]
View
Any view
Parameters
group-name: Name of the desired SNMP group, a string of 1 to 32 characters.
Description
Use the display snmp-agent group command to display the information about an SNMP group,
including group name, security mode, related views, and storage mode.
A group is used to define security mode and related views. Users in the same group have the common
attributes.
Security mode falls into three types: authPriv (authentication with privacy), authNoPriv (authentication
without privacy), noAuthNoPriv (no authentication no privacy).
Related views include: read MIB view, write MIB view, and MIB view in which traps can be sent.
For the configuration of an SNMP group, refer to the snmp-agent group command.
Examples
# Display the information about all the SNMP groups.
<Sysname> display snmp-agent group
Group name: v3group
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: ViewDefault
Notifyview : ViewDefault
Storage-type: nonVolatile
To Next Page
Loading...
