1-8
Parameters
ip-address: IP address. This argument is used to display the user address entry with the specified IP
address.
dynamic: Displays the dynamic user address entries.
static: Displays the static user address entries.
tracker: Displays the interval to update the user address entries.
Description
Use the display dhcp-security command to display information about address binding entries on the
DHCP relay agent.
Examples
# Display information about all address binding entries.
<Sysname> display dhcp-security
IP Address MAC Address IP Address Type
10.1.1.1 0001-0001-0001 Static
192.168.10.2 000d-88f7-b090 Dynamic_ack
--- 2 dhcp-security item(s) found ---
Table 1-1 Description on the fields of the display dhcp-security command
Field Description
IP Address IP address of the DHCP client
MAC Address MAC address of the DHCP client
IP Address Type Type of the user address entry (static/dynamic)
display dhcp-server
Syntax
display dhcp-server groupNo
View
Any view
Parameters
groupNo: DHCP server group number, ranging from 0 to 19.
Description
Use the display dhcp-server command to display information about a specified DHCP server group.
Related commands: dhcp-server ip, dhcp-server, display dhcp-server interface vlan-interface.
Examples
# Display information about DHCP server group 0.
<Sysname> display dhcp-server 0
To Next Page
Loading...
