3Com Switch 4500 Family - Display Rsa Local-Key-Pair Public

1-3
---------------------------
RSA 1023 idrsa
RSA 1024 18
# Display the information about the public key named pubkey-name.
<Sysname> display public-key peer name pubkey-name
=====================================
Key name : pubkey-name
Key type : RSA
Key module: 1024
=====================================
Key Code:
30819D300D06092A864886F70D010101050003818B00308187028181009C46A8710216CEC0C01C7CE136BA76
C79AA6040E79F9E305E453998C7ADE8276069410803D5974F708496947AB39B3F39C5CE56C95B6AB7442D563
93BF241F99A639DD02D9E29B1F5C1FD05CC1C44FBD6CFFB58BE6F035FAA2C596B27D1231D159846B7CB9A775
7C5800FADA9FD72F65672F4A549EE99F63095E11BD37789955020123
display rsa local-key-pair public
Syntax
display rsa local-key-pair public
View
Any view
Parameters
None
Description
Use the display rsa local-key-pair public command to display the public key of the current switch’s
RSA key pair. If no key pair has been generated, the system displays a message, telling you that no
RSA keys are found..
Related commands: rsa local-key-pair create.
Examples
# Display the public key of the current switch’s RSA key pair.
<Sysname> display rsa local-key-pair public
=====================================================
Time of Key pair created: 20:08:35 2000/04/02
Key name: Sysname_Host
Key type: RSA encryption Key
=====================================================
Key code:
3047
0240
DE99B540 87B666B9 69C948CD BBCC2B60 997F9C18