3Com Switch 4500 Family - 1 Ipv6 Configuration Commands; Basic Ipv6 Configuration Commands; Display Ipv6 Fib

1-1
1 IPv6 Configuration Commands
Basic IPv6 Configuration Commands
display ipv6 fib
Syntax
display ipv6 fib
View
Any view
Parameters
None
Description
Use the display ipv6 fib command to display all the IPv6 FIB entries.
The switch looks up a matching IPv6 FIB entry for forwarding an IPv6 packet.
Examples
# Display all the IPv6 FIB entries.
<Sysname> display ipv6 fib
FIB Table:
Total number of Routes : 5
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : HU
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : InLoopBack0
Destination: FE80:: PrefixLength : 10
NextHop : :: Flag : BU
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : NULL0
Destination: 2008:: PrefixLength : 64
NextHop : 2008::5600 Flag : U
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : Vlan-interface1
Destination: 2008::5600 PrefixLength : 128
NextHop : ::1 Flag : HU
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : InLoopBack0
Destination: 2001:: PrefixLength : 64