3Com Switch 4500 Family - System-View; Display Clock; System Status and Information Display Commands

1-5
View
System view
Parameters
sysname: System name of the Ethernet switch. It is a string of 1 to 30 characters. By default, it is 3Com.
Description
Use the sysname command to set the system name of an Ethernet switch. Use the undo sysname
command to restore the default system name of the Ethernet switch.
Changing the system name will affect the CLI prompt. For example, if the system name of the switch is
3Com, the prompt for user view is <3Com>.
Examples
# Set the system name of the Ethernet switch to LSW.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] sysname LSW
[LSW]
system-view
Syntax
system-view
View
User view
Parameters
None
Description
Use the system-view command to enter system view from user view.
Related commands: quit, return.
Examples
# Enter system view from user view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]
System Status and Information Display Commands
display clock
Syntax
display clock