1-45
Parameters
authentication-server-down: Enables/disables the switch to send trap messages when a RADIUS
authentication server turns down.
accounting-server-down: Enables/disables the switch to send trap messages when a RADIUS
accounting server turns down.
Description
Use the radius trap command to enable the switch to send trap messages when a RADIUS server
turns down.
Use the undo radius trap command to disable the switch from sending trap messages when a
RADIUS authentication server or a RADIUS accounting server turns down.
By default, this function is disabled.
This configuration takes effect on all RADIUS scheme.
The switch considers a RADIUS server as being down if it has tried the configured maximum number of
times to send a message to the RADIUS server but does not receive any response.
Examples
# Enable the switch to send trap messages when a RADIUS authentication server turns down.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius trap authentication-server-down
reset radius statistics
Syntax
reset radius statistics
View
User view
Parameters
None
Description
Use the reset radius statistics command to clear RADIUS message statistics.
Related commands: display radius scheme.
To Next Page
Loading...
