1-12
[Sysname] ftm fabric-vlan 2
xrn-fabric authentication-mode
Syntax
xrn-fabric authentication-mode { simple password | md5 key }
undo xrn-fabric authentication-mode
View
System view
Parameters
simple: Uses simple authentication mode.
password: Password for fabric authentication, a string of 1 to 16 characters.
md5: Uses MD5 encryption authentication mode.
key: MD5 key, a string of 1 to 16 characters.
Description
Use the xrn-fabric authentication-mode command to configure the authentication mode and
password for an XRN fabric.
Use the undo xrn-fabric authentication-mode command to remove the XRN fabric authentication
configuration.
By default, no authentication mode is configured on a switch.
XRN fabric authentication is used to ensure the security of the devices accessing it. Only the device
configured with the same authentication mode and password with that of the fabric can access the
current XRN fabric.
Examples
# Set the authentication mode of the XRN fabric to simple, with the password being hello.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] xrn-fabric authentication-mode simple hello
port link-type xrn-fabric
Syntax
port link-type xrn-fabric
View
Ethernet port view
Parameters
None
To Next Page
Loading...
