3Com Switch 4500 Family - Terminal Debugging; Terminal Logging

1-19
terminal debugging
Syntax
terminal debugging
undo terminal debugging
View
User view
Parameters
None
Description
Use the terminal debugging command to enable debugging terminal display.
Use the undo terminal debugging command to disable debugging terminal display.
By default, debugging terminal display is disabled.
You can execute the terminal debugging command to display debugging information on a user
terminal.
Related commands: debugging commands in the System Maintenance and Debugging module of the
manual.
Examples
# Enable debugging terminal display.
<Sysname> terminal debugging
terminal logging
Syntax
terminal logging
undo terminal logging
View
User view
Parameters
None
Description
Use the terminal logging command to enable log terminal display.
Use the undo terminal logging command to disable log terminal display.
By default, log terminal display is enabled for console users and terminal users.
Examples
# Disable log terminal display.
<Sysname> undo terminal logging